How to Setup Your Snow Lamp

Step-by-step guide to assemble and activate your Snow Lamp

Video Tutorial

Watch this video for a visual guide on setting up your Snow Lamp

Step-by-Step Instructions

1

Unbox Your Snow Lamp

Carefully unbox your Snow Lamp and lay out all components on a clean surface.

2

Assemble the Street Light Model

Place the street light model plastic perfectly in the designated position inside the box.

3

Apply Glue with Heat Gun

Use the glue gun stick to apply adhesive to the street light model. Heat it using any heat source (hair dryer, heat gun) to activate the glue.

4

Add Snow Particles

Add the small snow-like particles into the box around the street light model.

5

Seal the Box

Close the box carefully and use the bottle glue to seal all edges securely.

6

Apply UV Light

Use the UV light provided to cure the glue. Hold it for 30+ minutes to ensure the glue sets perfectly.

7

Prepare the Water Solution

Use the bottle provided and add the remaining snow particles to it. Fill with water.

8

Fill the Box with Water

Carefully pour the water and snow particle mixture into the box through the designated hole until it's close to the top.

9

Seal the Water Hole

Use the glue gun stick to seal the water hole. Apply glue and heat it to secure.

10

Enjoy Your Snow Lamp

Simply shake your Snow Lamp and watch the magical snow effect! Your lamp is now ready to use.

Important Tips

  • •Handle all components with care to avoid breakage
  • •Ensure the UV light curing time is at least 30 minutes for best results
  • •Use distilled water for the best clarity and longevity
  • •Do not overfill with water—leave some space at the top
  • •Shake gently to enjoy the snow effect without causing damage